JVC VR-716E Instructions Manual page 27

"ALARM/SENSOR MODE" Menu
This menu is used for specifying settings related to alarm or sensor recording.
Alarm/sensor inputs are either received via the [ALARM IN] terminal at the rear panel of VR-716 or via Motion Detect.
[ ● ] are factory settings. (Setting is disabled when in the Recording mode.)
Item
"BLOCK"
"REC MODE"
"FRAME RATE"
"QUALITY"
"DURATION"
"AUDIO REC"
"PRESENSOR REC"
"PRESENSOR REC
DURATION"
Settings
● 1
2
3
4
● "ALARM"
"SENSOR"
"ALARM/SENSOR"
● "25 IPS"
"12.5 IPS"
"8.3 IPS"
"4.2 IPS"
● "H"
"N"
"B"
"L"
"10 SEC"
"15 SEC"
"30 SEC"
"60 SEC"
"120 SEC"
● "180 SEC"
"MANUAL"
● "ON"
"OFF"
"ON"
● "OFF"
● "10 SEC"
"20 SEC"
"30 SEC"
For selecting the camera channel block for which alarm or sensor recording settings
are to be specified.
1 : Sets to Camera Channels 1 - 4.
2 : Sets to Camera Channels 5 - 8.
3 : Sets to Camera Channels 9 - 12.
4 : Sets to Camera Channels 13 - 16.
For specifying settings related to alarm and sensor recording.
"ALARM" : Starts alarm recording only when VR-716 is in the normal
recording mode.
"SENSOR" : Starts sensor recording only when VR-716 is in the Stop
mode.
"ALARM/SENSOR" : Starts alarm recording when in the normal recording mode
and sensor recording when in the Stop mode.
☞ Page 66 'Activation of Recording Via External Alarm/Sensor Signals'
For setting the frame rate during alarm recording. Value is set according to the no. of
images to record in 1 second.
For setting the picture quality during alarm recording.
"H" : HIGH (High picture quality)
"N" : NORMAL (Normal picture quality)
"B" : BASIC (Basic picture quality)
"L" : LONG (Long-play quality)
For setting the duration of alarm or sensor recording.
"10 SEC" ~ "180 SEC" : Duration of alarm/sensor recording.
"MANUAL" : Continues alarm/sensor recording when alarm signals are
input. (Maximum: 20 minutes)
In the case of alarm or sensor recording via Motion Detect,
recording lasts for a duration of 10 seconds upon the last
sensor detection.
For setting whether to record audio signals.
"ON" : Audio signals recorded.
"OFF" : Audio signals not recorded.
For setting whether to activate presensor recording.
Select "ON" to activate presensor recording.
☞ Page 113 'Presensor Recording'
For setting the duration of presensor recording.
"10 SEC" : Activates presensor recording over an interval of 10 ~ 20 seconds.
"20 SEC" : Activates presensor recording over an interval of 20 ~ 30 seconds.
"30 SEC" : Activates presensor recording over an interval of 30 ~ 60 seconds.
☞ Page 113 'Presensor Recording'
Description
27