JVC VR-716E Instructions Manual page 12

Getting Started (continued)
Names and Functions (Front Display)
1
1 Operation Mode Indicator
Displays the operation mode of VR-716.
_
Recording
Lights up in red.
<
Play
I
Still
< <<
Fast Forward / Slow Play
= ==
Rewind / Slow Play
< I
Single Frame Playback
< blinks.
= I
Single Frame Reverse Playback
= blinks.
<
_
Simultaneous Playback
< and _ blink alternately.
Still Mode During Simultaneous
_ I
Playback
I and _ blink alternately.
12
2 3 4 5 6
1 2 ALARM 5 6
SENSOR
3 4 7 8
ALARM
SENSOR
9 10 ALARM 13 14
SENSOR
SEQUENCE
REC STOP PLAY
MULTI
11 1 ALARM 15 16
SENSOR
7 8
0
2
(Timer) Indicator
Lights up when in the Timer Recording Standby or Timer
Recording mode.
☞ Page 46 'Record Programming Using the Program Timer'
3
(Repeat Record) Indicator
Lights up when VR-716 is set in the Repeat Record mode.
☞ Page 37 'Repeat Recording'
4
(Overlap) Indicator
Lights up when there is overlap in the timer recording pro-
grams of the Weekly Timer.
5 Weekly Timer Program No.
When the Weekly Timer Recording is activated, the LED of
the Program No. for which recording is currently executed
will start blinking. When in the Timer Standby mode, the
Timer Program No. which has been set will light up.
The light goes off upon completion of the timer recording.
6 [AL] (Alarm) Indicator
Lights up during the Alarm/Sensor Recording mode.
Light will start to blink upon completion of alarm/sensor re-
cording.
7 [LOCK] (Lock) Indicator
Lights up when the operation lock is enabled.
8
(Alarm Recording) Indicator
Lights up when in the Alarm Recording Standby mode.
☞ Page 66 'Activation of Recording Via External Alarm/Sen-
sor Signals'
9
(Sensor Recording) Indicator
Lights up when in the Sensor Recording Standby mode.
☞ Page 66 'Activation of Recording Via External Alarm/Sen-
sor Signals'
HDD
OPERATE
CANCEL SEARCH MENU
REV FWD
TIMER LOCK
OUT
DISPLAY
EXECUTE
VIDEO AUDIO
STILL
SKIP
9