JVC VR-716E Instructions Manual page 26

Menus (continued)
"MONITOR DISPLAY" Menu
[ ● ] are factory settings.
Item
● "1-4"
"EE OUT1 - 4/ -16"
"SINGLE PICTURE
MODE"
"SINGLE PICTURE
● "1 SEC"
MODE"
"CAMERA1"
~ "CAMERA16"
"QUAD PICTURE
● "1 SEC"
MODE"
"BLOCK 1"
~ "BLOCK 4"
● "OFF"
"ALARM/SENSOR
SWITCH"
"SPLIT SCREEN
BORDER COLOR"
● "BORDER 3"
26
Settings
For setting the screen during output of camera images in VR-716 to the [EE OUT
1-4/-16] terminal.
"1-16"
"1-4"
"1-16"
☞ Page 32 'When Connecting the Monitor to the [EE OUT] terminal'
For setting the time interval at which display at VR-716 is switched from the live
"OFF"
image of one camera to another.
"OFF"
"2 SEC"
"1 SEC"
"3 SEC"
"2 SEC"
"4 SEC"
"3 SEC"
"5 SEC"
"4 SEC"
"10 SEC"
"5 SEC"
"10 SEC"
☞ Page 34 'Setting Time Interval for Switching Displays in the Single Picture Mode'
For setting the time interval at which display is switched from one camera channel
"OFF"
block to another when in quad picture.
"OFF"
"2 SEC"
"1 SEC"
"3 SEC"
"2 SEC"
"4 SEC"
"3 SEC"
"5 SEC"
"4 SEC"
"10 SEC"
"5 SEC"
"10 SEC"
☞ Page 35 'Setting Time Interval for Switching Displays in the Quad Picture Mode'
For setting the switching mode of the monitor screen when alarm/sensor signals are
received.
"SEQUENTIAL"
"OFF"
"FIX"
"SEQUENTIAL" : Sends only output of cameras for which alarm has been triggered
"FIX"
• Screen display of monitor can be switched using the Camera Selection but-
• When multiple alarms are simultaneously detected, image of cameras for which
For setting the brightness of the border line of split screen.
"OFF"
"BORDER 1"
"BORDER 1"
"BORDER 2"
"BORDER 2"
"BORDER 3"
: Images displayed in quad picture.
: Images displayed in 16 split pictures.
: Automatic switching of camera channels turned off.
: Switches camera channel at an interval of 1 second.
: Switches camera channel at an interval of 2 seconds.
: Switches camera channel at an interval of 3 seconds.
: Switches camera channel at an interval of 4 seconds.
: Switches camera channel at an interval of 5 seconds.
: Switches camera channel at an interval of 10 seconds.
: Automatic switching of camera channels turned off.
: Switches camera channel at an interval of 1 second.
: Switches camera channel at an interval of 2 seconds.
: Switches camera channel at an interval of 3 seconds.
: Switches camera channel at an interval of 4 seconds.
: Switches camera channel at an interval of 5 seconds.
: Switches camera channel at an interval of 10 seconds.
: Sends output to monitor according to the Camera Selection button
settings.
to the monitor in sequence. (Switching of display is fixed at an inter-
val of 1 second.)
: Sends only output of the camera for which its alarm has last been
triggered to the monitor.
Notes
tons even when "SEQUENTIAL" or "FIX" are selected.
alarm has been triggered will be output to the monitor alternately even when
"FIX" is selected.
: Dark grey
: Grey
: Bright grey
Description