JVC VR-716E Instructions Manual page 30

Menus (continued)
"PROGRAM TIMER" Menu (continued)
[ ● ] are factory settings.
Item
"DATE TIMER"
"START"/ "END"
00 ~ 23
TIME (HOUR)
"START"/ "END"
00 ~ 59
TIME (MINUTE)
"FRAME RATE"
25
12.5
8.3
4.2
2.5
1.7
1
1/2
1/6
1/12
"REC QUALITY" "H"
"N"
"B"
"L"
"AUDIO REC"
"A"
–
● "ON"
"EXEC"
START DATE "M"
1 ~ 12
(MONTH)
START DATE "D"
1 ~ 31
(DAY)
"AFTER RELEASE"
● "STOP"
Action when timer is released according to the respective settings of "AFTER RELEASE"
30
Settings
For executing the recording of a program on a specific date.
Opens the "DATE TIMER" screen in the "PROGRAM TIMER" Menu for setting.
☞ Page 52 'Record Programming Using the Program Timer (Date Timer)'
For setting the starting/ending time (in units of hours) of the timer.
For setting the starting/ending time (in units of minutes) of the timer.
For setting the no. of frames to be recorded.
25
12.5 : "12.5 IPS"
8.3
4.2
2.5
• "AUDIO REC" switches automatically to "–" when "1/6 IPS" (1 image per 6
For setting the picture quality of the image to be recorded.
"H" : HIGH (High picture quality)
"N" : NORMAL (Normal picture quality)
"B" : BASIC (Basic picture quality)
"L" : LONG (Long-play quality)
For setting whether to record audio signals.
"A" : Audio signals recorded.
–
• Switches automatically to "–" when "1/6 IPS" (1 image per 6 seconds) or "1/12
For turning on/off the programmed timer.
"OFF" "ON"
"OFF"
For setting the date (in the Month unit) at which timer recording is executed.
For setting the date (in the Day unit) at which timer recording is executed.
• When execution date is set as February 28 and ending date as the following
"CONTINUE" For setting the action when the timer is released upon pressing the [TIMER] button
"NORMAL REC" during timer recording or timer standby, or when all the timer recordings have ended
and timers are released.
"CONTINUE"
"NORMAL REC"
"STOP"
Timer Recording
Continues in the timer recording mode
CONTINUE
Starts normal recording
NORMAL REC
STOP
: "25 IPS"
: "8.3 IPS"
: "4.2 IPS"
: "2.5 IPS"
Note
seconds) or "1/12 IPS" (1 image per 12 seconds) is selected for "FRAME
RATE".
: Audio signals not recorded.
Note
IPS" (1 image per 12 seconds) is selected for "FRAME RATE" item in the
menu.
: Starts recording on the specified date every year.
: Timer not activated.
Note
day, the ending date of the program will be February 29 on leaps years and
March 1 otherwise.
: When the timer is released during timer recording, it con-
tinues in the recording mode until the [STOP] button is
pressed.
When the timer is released during timer standby or when
all the timer recordings have ended, it remains in the stop
mode.
: Stops recording using the Program Timer and switches to
recording in the mode as set in the "REC MODE" Menu
(☞ Page 24).
: Stops recording using the Program Timer instantly.
Status when timer is released
Timer Standby
Starts normal recording
STOP
Description
1.7 : "1.7 IPS"
1 : "1 IPS"
1/2 : "1/2 IPS"
1/6 : "1/6 IPS"
1/12 : "1/12 IPS"
All programs ended
STOP
Starts normal recording
STOP
STOP
STOP