L540Eb Log Set Installation - Regency L540EB Owners & Installation Manual

installation
Read the instructions below carefully and refer to the images. If the logs are broken do not use the unit until they are replaced. Broken
logs can interfere with pilot operation.
Improper positioning of the logs may create carbon build-up and can alter the unit's performance which is not covered under warranty.
*Satin black paint is included if touch ups are required.
1 Rear Back Log
2 Left Side Log
3 Right Front Log Piece
4 Left Front Log Piece
5 Right Front Log
6 Right Cross Log
7 Left Upright Log
1) Identify Log 1 provisions on rear and right of burner in unit - see
below.
Log 1 provisions on burner tray
2) Place Log 1 so it is positioned perpendicular to the fl oor - see below.
Log 1 in position
24
919-064a

L540EB LOG SET INSTALLATION

LOG INSTALLATION
1
7
2
3) Locate the provision on the base of Log 2, place log on burner - see
below.
2
4) Log 2 should lean against Log 1 - as shown below.
2
Log 2 in position
L540EB
1
6
5
4
3
1
1
L540EB / HZI540EB Direct Vent Gas Insert
09/08/11