Setting The Date And Time - Konica Minolta CM-2600d Instruction Manual

Initial Setting

Setting the Date and Time

[Setting Procedure]
<MENU> screen
1
Turn B to select "CLOCK", then press A.
2
Turn B to select "ADJUST", then press A.
The cursor will move to the current-
ly set date, allowing you to change
it.
3
Turn B to select the desired date and time, then press A.
The selected date and time will be
set.
• Each time A is pressed, the cursor will move as follows:
"day" → "month" → "year" → "hour" → "minute" → "second" → "PREV"
• Keeping B held down to left or right will cause the date/time to change continuously.
• To change the entries, restart from step 2.
<Settings>
• Day: 01 to 28, 29, 30, 31 (varies with the selected month)
• Month: 01 to 12
• Year: 00 to 99 (lower two digits)
• Hour: 00 to 23
• Minute: 00 to 59
• Second: 00 to 59
4
Turn B to select "PREV", then press A.
The settings you made at step 3 will
be confirmed, and the <MENU>
screen will reappear.
E-30