Walk-Up Video Printing; Getting Started - Brother MFC9100C Service Manual

11
11

Walk-Up Video Printing

Getting Started

Walk-Up Video Printing lets you use your MFC, connected to your
camcorder, digital camera, video game, or VCR, to view a video on the
attached equipment. The video signal and the output you create are NTSC
(National Television System Committee). This is not compatible with any
other standard.
With no documents in the feeder, plug the cable from you video camera's
Video Out jack into the MFC's RCA pin jack. Play the video.
Some camcorders, digital cameras, video games or VCRs do not correctly
conform with NTSC standards. Then you would not be able to capture
video signals.
W A L K - U P V I D E O P R I N T I N G 11 - 1