Brother MFC9100C Service Manual page 166

Selector
No.
1
| Not used.
6
Impedance switching control in
7
pulse dialing
Beep when the memory area for
8
the activity report becomes full
NOTE: Selector 8 is applicable to the European version only.
Selector 8: Beep when the memory area for the activity report becomes full
l
If this selector is set to "1," the equipment will beep when the memory area for the activity report
becomes full (as well as displaying a message on the LCD, prompting the output of the activity
report).
Selector
No.
1
| Not used.
8
WSW29
(Function setting 7)
Function
WSW30
(Function setting 8)
Function
V - 39
Setting and Specifications
0: OFF 1: ON
0: No 1: Yes
Setting and Specifications