Manual Transmission (Adf); Manual And Automatic Fax Redial; Dual Access - Brother MFC9100C Service Manual

Manual Transmission (ADF)

Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document in the feeder or on the scanner glass.
2
Press for a dial tone.
Hook
3
Enter the fax number you want to call (you can enter the digits using the
dial pad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index). (See Auto Dial Numbers and Dialing Options,
page 7-1.)
4
When you hear the fax tone, press
5
Press to begin sending.
1

Manual and Automatic Fax Redial

If you're sending a fax manually and the line is busy, press
retry the number.
If you're sending a fax automatically (using the ADF) and the line is busy,
the MFC will automatically redial up to three times at 5 minute intervals.

Dual Access

If the document feeder is empty, you can place a document in the feeder
and set temporary settings, dial a number, and begin scanning the fax into
memory—even when the MFC is receiving a fax, sending a fax, or
printing a fax from memory. The screen displays the new job number and
available memory.
You cannot use Scan Fax when the MFC is sending, receiving or printing a
fax.
If you get a MEMORY FULL message while scanning the first page of a
fax press to cancel the scan. If you get a MEMORY FULL message
Stop
while scanning in a subsequent page, you'll have the option to press
transmit the pages scanned so far, or to press
The number of documents you can scan into memory varies with the data
they contain.
.
Start
1.SEND 2.RECEIVE
to cancel the operation.
Stop
S E T U P S E N D
to
Redial/Pause
to
Start
6 - 5