Walk-Up Video Printing; Introduction; Getting Started; Setting Up Video Print Mode - Brother IntelliFax-4750 Software Manual

1
1

Walk-Up Video Printing

Introduction

Walk-Up Video Printing lets you use your Brother machine (connected to
your camcorder, digital camera, video game, or VCR) to capture a video
frame on the attached equipment and print it on your MFC. The video
signal and the output you create are NTSC (National Television System
Committee). They are not compatible with any other standard.

Getting Started

With no documents in the feeder,
plug the cable from you video
camera's Video Out jack into the
Brother machine's RCA pin
jack. Play the video.
Some camcorders, digital cameras, video games or VCRs do not correctly
conform with NTSC standards. Then you would not be able to capture
video signals.

Setting Up Video Print Mode

Whenever you connect video
equipment to the Brother machine
and turn on the video signal, the
machine's Copy keys automatically
switch to video printing mode
and the screen displays
VIDEO:PRESS COPY
CAPTURE READY
As soon as you turn off the video equipment or disconnect it, the Copy
keys return to normal Copy mode. If you have too much in memory, you
cannot access video printing mode.
Enlarge
Sort
W A L K - U P V I D E O
Reduce
Copy
Photo
P R I N T I N G 1 - 1