Alternating Displays; Function Selection Table; Fax Functions - Brother MFC9100C Service Manual

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between
the currently selected option, and a help message giving brief instructions
about how to proceed. The display you'll probably see most often is
shown below, showing you, when you place a document in the feeder, that
you can dial a number and send a fax, or you can make a copy.

Function Selection Table

You can probably perform most of these programming settings without
the Owner's Manuals. To help you understand the function selections,
options and settings that are found in the MFC programs, use the Function
Selection Table below.

1. Fax Functions

1. INITIAL SETUP
Function
1. TONE/PULSE
2. DATE/TIME
3. STATION ID
4. BEEPER
5. DELAYED TIMER
6. SPEAKER VOLUME
7. RING VOLUME
3 - 2 O N - S C R E E N
FAX: NO. & START
SCAN READY
COPY: PRESS COPY
SCAN READY
Description
Selects dialing mode.
Enter date and time for
LCD display and heading
on transmissions.
Program name, fax
number and telephone
number to appear on
each transmitted page.
Adjust volume level
of beeper.
Sets the time of day for
delayed faxes. You can
accept it or enter another
time when you scan each
fax into memory in
"Delayed Fax"
Adjust speaker volume.
Adjust volume of ringer.
P R O G R A M M I N G
Factory Set Page
TONE
2000 1/1 00:00
—
LOW
00:00
LOW
LOW
4-1
4-1
4-2
4-3
4-4
4-4
4-4