Battery; Figure 8-4. Attaching The Battery - Motorola Astro XTS 4000 Service Manual

Disassembly/Reassembly Procedures: Battery
8.5

Battery

This section explains how to properly attach and remove the battery.
NOTE: The Motorola-approved battery shipped with the XTS 4000 radio is uncharged. Prior to using
a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and
performance.
8.5.1 Attach the Battery
To attach the battery:
1. With the radio turned off, insert the bottom edge of the battery into the slot at the back of the
Main Chassis as shown.
NOTE: Do not attach the battery without engaging the bottom tabs to prevent damage to the battery
or the radio
2. Rotate the battery toward the radio and press down until the battery clicks into place.
8.5.2 Remove the Battery
To remove the battery:
1. With the radio turned off, press the release button on the top of the battery until the battery
releases from the radio.
To avoid a possible explosion:
• DO NOT charge, remove, or attach the battery in an area
labeled "hazardous atmosphere."
• DO NOT discard batteries in a fire.
If the radio is programmed for volatile-key retention,
encryption keys will be retained for approximately 30 seconds
after battery removal.
step 2
Figure 8–4. Attaching the Battery
step 1
8-5