Disassembly/Reassembly Procedures: Battery
8.3
Battery
This section explains how to properly attach and remove the battery.
!
!
W A R N I N G
!
C a u t i o n
NOTE: The Motorola-approved battery shipped with the XTS 5000 radio is uncharged. Prior to using
a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and
performance.
8.3.1
Attach the Battery
To attach the battery:
1. With the radio turned off, insert the top edge of the battery into the radio's frame as shown.
2. Rotate the battery toward the radio and press down until the battery clicks into place.
6881094C28-D
To avoid a possible explosion:
• DO NOT charge, remove, or attach the battery in an area
labeled "hazardous atmosphere."
• DO NOT discard batteries in a fire.
If the radio is programmed for volatile-key retention,
encryption keys will be retained for approximately 30 seconds
after battery removal.
Figure 8-4. Inserting the Top Edge of the Battery
Figure 8-5. Pressing the Battery into Place
8-5
July 16, 2004