Figure 6-11. Transmit Deviation Balance Alignment Screen - Vhf; Figure 6-12.Transmit Deviation Balance Alignment Screen - Uhf - Motorola Astro XTS 4000 Service Manual

6-10
Figure 6–11. Transmit Deviation Balance Alignment Screen – VHF
Figure 6–12. Transmit Deviation Balance Alignment Screen – UHF
6. Click the PTT Tone: Low button.
7. Click the PTT Toggle button on the screen to enable transmission. The screen indicates
whether the radio is transmitting. Wait approximately 5 seconds until the voltage shown on
R-2670, or the deviation shown on the 8901_ analyzer, stabilizes.
8. Measure and record the ac voltage value from the R-2670 analyzer or the deviation value
from the 8901_ series analyzer.
9. Left-click the PTT Tone: High button.
Radio Alignment Procedures: Transmit Deviation Balance Alignment