Table of Contents
Advertisement
MN006360A01-AE
Chapter 2: Radio and Battery Care
Chapter 2
Radio and Battery Care
Proper usage and care of your radio and battery ensure efficient operation and long life of the product.
2.1
Looking after Your Radio
Never leave your radio or battery in extreme temperatures, for example, behind a windscreen in direct
sunlight. Your radio is submersible (compliant with the IP68 standard) – but only with the battery and
the antenna attached. To clean your radio, use a moistened or antistatic cloth.
NOTE:
•
Ensure no contamination is on the Gore
on the back of your radio chassis.
•
It is recommended to use Universal Connector Dust Cover (Motorola Solutions part number:
PMHN4429_) if your radio is deployed near the seaside or salt water area, when it is without
any audio accessory attached on it.
2.2
Troubleshooting
Your radio displays the following messages:
Table 2: Displayed Messages
Message
Attachment Failed
Authenticate Failure
Call Barred
Call Canceled
Call Ended
Call Forwarding
Call Modified
Cert. not enrolled
Call Preempted
16
™
Port membrane, that is the area labeled as VENT
Message Description
Your radio could not perform talkgroup attachment. It
keeps on trying. If it does not succeed, try another talk-
group.
Your radio could not register on an authenticated system
(for example, the Authentication Key is incorrect, or au-
thentication is disabled).
The call is barred due to Barred Incoming Call or Barred
Outgoing Call Profile.
You have canceled the call.
•
Faulty channel. Please try later.
•
You have ended the call.
The radio you are trying to call is not available and the call
is being forwarded to another radio.
The call you are participating in has been modified.
Check for Wi-Fi update triggered from Menu failed be-
cause the required certificate is not enrolled on your radio.
Contact your service provider.
Channel being used for priority.
- Quick Links:
- One-Touch Buttons
Hide quick links:
Advertisement
Table of Contents
