Washer/Dryer - Stackable - Winnebago Itasca Ellipse Owner's Manual

WASHER/DRYER - STACKABLE

–If Equipped
To Reset or Cancel a Wash Cycle
If resetting or canceling a program is
necessary:
1. Rotate the PROGRAMS dial clockwise to a
STOP/RESET position.
2. Wait five seconds.
3. Rotate the PROGRAMS dial to the desired
washing program, or DRAIN.
After the washer drains, wait for the DOOR
LOCK light to extinguish before attempting to
open the door.
The washing machine door will stay locked
for up to two minutes after the program is
completed.
NOTE: Never attempt to open the door when the
DOOR LOCK light is on!
Water Supply Faucets
The washing machine water supply faucets
are accessible below the lavatory cabinet (Model
40CD) or behind a removable access panel on the
side of the washer/dryer cabinet (Model 42AD).
Always turn water supply faucets off when not
using washing machine to avoid possible water
leaks if a hose or hose gasket should fail.
APPLIANCES AND SYSTEMS
Model 40CD
Water Supply Faucets
(Located below bathroom sink)
Model 42AD
NOTE: Bedroom slideout must be extended to
get to the access panel.
Water Supply Faucets
(Located on the side of washer/dryer
cabinet - remove panel to access)
* Shown with slideout room extended
See Winterization Procedure in Plumbing
Section.
Further Information
For complete washer/dryer operating
instructions, see the manufacturer's information
provided in your InfoCase.
SECTION 4 –
4-25