Cd/Dvd Player - Bedroom - Winnebago Itasca Ellipse Owner's Manual

Play DVD with Theater Sound
• Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING".
• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by pressing the
chapter "advance" button until you see the
main menu screen.
• When the main menu
screen appears, use the
arrow buttons on the remote
to select the desired entry or
press the ENTER or PLAY
buttons on the remote (or
"Play" button on DVD
player) to begin playing the
feature.
• Volume is adjusted with the DVD remote (or
volume control on DVD player).
TV Sound through Home Theater
Speakers
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to home theater
speakers for a richer sound quality, follow these
steps:
• Turn the TV and DVD player On.
• Select the TV channel you wish to watch.
• Press FUNCTION button on DVD player or
remote to set DVD player to "TV/VIDEO".
• Use the TV Menu button to set TV audio
output to "Variable Audio Output" (See TV
owner's manual for instructions.) This will
route TV stereo sound output through the
home theater system.
• Adjust theater speaker master volume to
maximum on the DVD, then control volume
with the TV remote.

CD/DVD PLAYER - BEDROOM

(& Stereo Radio Alarm Clock)
–If Equipped
The TV operates from 120-volt AC household
current only, so you must have either the
shoreline connected, the generator running, or the
inverter turned on (if equipped).
The DVD player is connected to the TV and
plays through the TV stereo speakers.
Set TV Sound Output
-If Equipped
• Use the TV Menu button to set TV audio
output to Variable Audio Output (See TV
owner's manual for instructions.) This will
connect TV stereo sound output to the deluxe
speakers (if equipped).
• Volume is adjusted with the TV remote or
volume buttons.
Set TV Video Input
• Turn TV and DVD player On.
• Press the SOURCE or INPUT button on the
TV or TV remote to select "INPUT 1" or
"AV1".
• The TV screen will display the DVD player
logo when the correct input is selected.
Play DVD
• Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING".
SECTION 8 –
ENTERTAINMENT
8-3