Tv Antenna - Winnebago Itasca Ellipse Owner's Manual

SECTION 8 –
ENTERTAINMENT
4. Close the access lid by hand to protect the TV
and to make for additional counter space.
NOTE: Be sure that the counter is clear before
raising/lowering the TV to protect the TV,
lift/lower mechanism, and personal
property from possible damage.

TV ANTENNA

The TV antenna on your motor home can be
easily raised, rotated a full 360° and lowered
from inside the vehicle by simply turning a crank
or directional handle. A built-in signal amplifier
designed to strengthen signals, is controlled by a
power switch built into the optional video
selector panel or on a wall plate assembly.
See the antenna manufacturer's operation,
care and maintenance information in your
InfoCase.
8-6
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.
Raising Antenna to Operating Position
Turn elevating crank clockwise in "UP"
direction until some resistance to turning is noted
(about 13 turns). Antenna is now in operating
position.
Turn amplifier power switch "ON" to receive TV
signal.
Rotating Antenna for Best Picture
Make sure antenna is in the "UP" position.
Pull down on directional handle using both hands
until it disengages ceiling plate and rotate for best
picture and sound on TV set.
Lowering Antenna to Travel Position
Rotate antenna until pointer on directional
handle aligns with pointer on ceiling plate.
Turn elevating crank (counter-clockwise) in
"DOWN" direction until resistance is noted
(about 13 turns). Antenna is now locked in travel
position. Turn amplifier power switch "OFF".