Note:
Both your device and the
5. Select Setup Devices.
6. Select Hands-free Setup.
7. Follow the onscreen instructions to create a
trusted pair with the specific device. (In some
cases you may need to perform setup steps on the
other device before you can complete this step.)
8. After you finish setting up the device, close the
Bluetooth application.
Tips for Handsfree Devices With Bluetooth Wireless Technology
If you're using a handsfree device with Bluetooth wireless technology, Treo
automatically routes all calls to that device. When a call comes in, your Treo
rings and the headset beeps. However, even if you pick up the call on your
Treo, the call goes to the headset.
If a headset with Bluetooth wireless technology is paired and within range
when you place a call, the call is routed to the headset, not the handset.
To transfer a call from a headset with Bluetooth wireless technology to your
Treo (handset) during a call, select
To set up advanced features, such as auto-answer and voice tags, go to
Applications
the settings. Note that your handsfree device with Bluetooth wireless
technology must support voice tags to use that feature.
Your Treo does not support Bluetooth wireless connections to stereo headsets,
keyboards, or LAN access points.
Using Your Device's Phone Features
Bluetooth
setting must be
and select Prefs
On
for your device to be discoverable.
from the Active Call view.
. Select Handsfree, and then configure
71