Ending A Call - palmOne Vision Smart Device Treo 650 User Manual

Places the current call on hold.
Lets you place another call while keeping the first call active. This button
replaces the Hold button when a call is on hold.
Opens the Dial Pad so you can enter extra digits or dial another number.
Dials any extra digits (such as a password or extension) that you assigned to a
Speed Dial favorite button. This button replaces the Dial Pad button during
outbound calls to numbers that include pre-defined extra digits. See "Creating a
Speed Dial Favorite Button" on page 65 for details on creating a Speed Dial
favorite button.
Mutes the Treo microphone so that you cannot be heard.
Tip:
To avoid accidentally pressing onscreen buttons while holding the device to your ear, you
can disable the screen's touch-sensitive feature during active calls (see "Auto-Keyguard
and Touchscreen Lockout" on page 140).

Ending a Call

Do one of the following to end a call:
Press Power/End
Select Hang Up.
Press the headset button (if the headset is attached).
Tip: When a call lasts longer than one minute, the screen turns off. Press any key except
Power/End
careful not to press
58
.
to wake up the screen, and then press
Power/End
to wake up the screen as this will accidentally end the call.
Power/End
to hang up the call. Be
Using Your Device's Phone Features