palmOne Vision Smart Device Treo 650 User Manual page 246

Applications" on page 252 for suggestions on diagnosing third-party software
issues.
Note:
Some third-party applications do not create a backup on your computer when you
synchronize. If you perform a hard reset, you may lose data in these applications and you
will need to reinstall these applications after the hard reset. Please contact the developer
to find out which information is backed up during synchronization.
1. Press the Battery Door Release button and slide the battery door downward to
remove it from your Treo.
2. While pressing and holding Power/End
press the reset button on the back of your Treo.
3. Continue pressing and holding Power/End
with a progress bar, and then the circular Palm Powered logo appears. When
the circular Palm Powered logo appears, release Power/End
4. When the "Erase all data?" prompt appears, press Up
reset.
Note:
If you do not see the "Erase all data?" message, the hard reset was not performed. Please
retry the above steps, making sure to hold
appears.
234
, use the tip of the stylus to gently
. First the palmOne logo appears
Power/End
until the circular Palm Powered logo
.
to confirm the hard
Help