palmOne Vision Smart Device Treo 650 User Manual page 120

Beaming an Application
Not all applications can be beamed. A lock icon
next to applications that cannot be beamed.
1. Go to Applications
2. Open the menus
3. Select Beam on the App menu.
4. Select the Beam From pick list and select whether the application you want to
beam is located on your Treo or an expansion card.
5. Select the application you want to transfer, and then select Beam.
6. When the Beam Status dialog box appears, point the IR port on your Treo
directly at the IR port of the receiving device.
7. Wait for the Beam Status dialog box to indicate that the transfer is complete
before you continue using your Treo.
Receiving Beamed Information
You can store beamed entries and applications on your device, or send them to an
expansion card inserted in the expansion slot.
1.
Turn on your screen.
2. Point the IR port on your Treo directly at the IR port of the transmitting
device to open the Beam Status dialog box.
3. When the Beam dialog box appears, select a category or expansion card. (If
you don't select a category, the item goes in the Unfiled category.)
4. Press Up
108
.
.
to receive the beam or press Down
appears on the Beam screen
to refuse it.
Using Your Device's Organizer Features