palmOne Vision Smart Device Treo 650 User Manual page 19

Check the indicator light to make sure your Treo is charging. If the battery is fully
drained, it may take a few moments for the indicator light to turn on while
charging. When your Treo is connected to a power source, the indicator light
glows solid (versus flashing), and the color of the light indicates the following:
Red indicator light: battery is charging.
Green indicator light: battery is fully charged.
Indicator light off: battery is not charging. Check the cable connection and the
outlet to which it is connected.
After you set up your Treo, the onscreen battery icon displays power status:
Full battery icon
Partial battery icon
Empty battery icon
Red lightning bolt
Green lightning bolt
Using a Sprint Charger Adapter
If the connector on your Sprint-approved 1 Amp AC charger or vehicle charger
doesn't fit into the connector on the bottom of your Treo, use the included Sprint
charger adapter.
Warning!
Use only with 1 Amp AC adapters distributd by Sprint for Treo 650. Using any unapproved
AC adapter may destroy the AC adapter and cause fire.
Setting Up Your Sprint PCS Vision
: battery is charged.
: battery has some power but is not fully charged.
: battery needs charging immediately.
: battery is charging.
: battery is fully charged.
SM
Smart Device Treo™ 650 by palmOne 7