palmOne Vision Smart Device Treo 650 User Manual page 153

Immediately locks your device when you select OK. The next time you
turn your device on again you must enter your lock code. After that, you
can turn your device on again without entering your lock code.
6. When prompted, enter the lock code, and then select OK. (Unless you
changed your lock code, the lock code is the last four digits of your phone
number.)
7. If you want to change the lock code, select Change Lock Code, enter a new
lock code, and then select OK. Repeat this step to verify the new lock code.
8. Based on the option you selected in step 5, do one of the following to lock
your device:
For On phone power off, turn off your device.
For Immediately, select OK.
9. To unlock your device, dial a number, enter your lock code, and then select
OK.
Note: To permanently unlock your device, open the
Lock
. Uncheck the
this setting.
Customizing Your Device
On phone power off
Options
menu, and then select
box. Your lock code is required to change
Phone
141