Replacing the Battery
Your Treo 650 comes with a replaceable battery. Be sure to use a Sprint-approved
battery that is compatible with Treo 650.
1.
Press Power/End
2. Press the Battery Door Release button and slide the battery door downward to
remove it from your Treo.
3. Place a finger in the notch between the stylus and the battery and lift the
battery up at a 45 degree angle.
4. Align the metal contacts on the battery with the contacts inside the battery
compartment.
5. Insert the battery into the compartment at a 45-degree angle and then press it
into place.
6. Slide the battery door onto the back of the device until it clicks into place.
7. Wait for your Treo to turn on, and then enable the network time or set the
date and time when prompted.
Help
to turn off the screen.
Battery Door Release
Notch
Battery
Contacts
Phone
Contacts
235