Charging The Battery - palmOne Vision Smart Device Treo 650 User Manual

Charging the Battery

You must charge your Treo 650 smart device fully before using it. It may not turn
on at all when you first remove it from the box.
1.
Plug the AC charger into a wall outlet.
2. Connect the charger cable to the bottom of the Treo. Make sure the arrow on
the connector is facing up, towards your Treo screen.
3. Wait for the indicator light to turn solid green. This may take up to four
hours.
Important
It is vital that you use only Sprint-approved AC adapter chargers, car chargers, and
replacement batteries. Use of unauthorized accessories could damage your device and
invalidate your warranty.
6 Setting Up Your Sprint PCS Vision
Indicator
Light
SM
Smart Device Treo™ 650 by palmOne