DBCS ASCII Style
This option specifies the appearance of single-byte numeric characters. For
the Hanzi LP+ printer, select from Normal, Oversize and OCRB. For the
Hangul LP+ printer, select from Normal, and OCRB.
Graphics Spd-Up
This menu is used to increase (speed up) graphic printing speed by turning on
Enhanced/Turbo mode. See "Graphics Spd Up" in the Programmer's
Reference Manual.
Reset Command
When the printer receives a host data stream reset command (ESC @) in
addition to resetting printer variables the selected configuration will be loaded.
•
Load Power On. The power-up configuration is loaded when the reset
command is executed.
•
Load Factory (default). The factory installed configuration is loaded
when the reset command is executed.
Quick Setup Menu
95