Table of Contents
Advertisement
Appendix A
Printer Dimensions And Weight
Form Thickness:
Drive:
Slew Rate:
6400-D3P
16 ips
Labels
On Backing: One-part continuous perforated fan-fold back form. Labels must
Sheet Size:
Thickness
Printer Dimensions And Weight
Cabinet Models
Height:
Width:
Depth:
Weight:
Pedestal Models
Height:
Width:
Depth:
Weight:
150
Multi-part carbonless, maximum of 6-part forms. Test
readability of greater than 4-part forms.
0.025 inches (0.064 cm) maximum
Adjustable tractors (6-pin engagement)
6400-D3C
6400-D6P
20 ips
16 ips
be placed at least 1/6 inch (0.42 cm) from the fan-fold
perforation. Backing adhesive must not be squeezed out during
printing.
3 to 17 inches (7.62 to 43.18 cm) wide*, including the two
standard perforated tractor feed strips. A maximum sheet
length of 16 inches (40.64 cm) between top and bottom
perforations.**
Not to exceed 0.025-inch (0.064 cm), including backing sheet.
*On pedestal models, when using the rear paper exit, the maximum
form width is 16 inches (40.64 cm).
**On cabinet models, forms longer than 12 inches can be used by
opening the front and rear printer doors.
42.5 inches (108.0 cm)
27 inches (68.6 cm)
29 inches (73.7 cm)
215.6 lbs. (98 kg) unpacked
264 lbs. (120 kg) packed
35.0 inches (88.9 cm)
24.6 inches (62.5 cm)
20.7 inches (52.6 cm)
107.8 lbs. (49 kg) unpacked
154 lbs. (70 kg) packaged
6400-D6C
6400-D8P
25 ips
25 ips
6400-D8C
32 ips
Advertisement
Table of Contents
