Table of Contents
Advertisement
Step
Key
6.
Scroll↑
UNTIL
7.
Enter
8.
Scroll↑
9.
Enter
10. Continue this pattern to make all of the changes, using the information in this chapter.
11. To save changes so that they will remain when the printer is reset or powered back on, see
"Saving Your Configuration In A Custom Set" on page 84. If you want to use these values but
not save them, continue to the next step.
12.
Stop
13.
+
Scroll↑
14.
Stop
LCD Results
PRINTER CONTROL
PRINT DIRECTION
PRINT DIRECTION
BIDIRECTIONAL*
PRINT DIRECTION
UNIDIRECTIONAL
PRINT DIRECTION
UNIDIRECTIONAL*
NOT READY
OPERATOR MENU
LOCKED
Scroll↓
READY
Changing Parameters
Configuration
Notes
Moves to the PRINT DIRECTION
parameter.
Move into the PRINT DIRECTION
menu. The asterisk (*) shows that
this is the active value.
Moves to the next available option,
the UNIDIRECTIONAL option.
Selects the displayed value. An
asterisk (*) appears indicating that
this choice is now the active value.
Returns the printer to the NOT
READY mode.
Locks Program mode and the
Operator Menu.
Places the printer in READY
mode, prepared for normal
operation.
83
Advertisement
Table of Contents
