Table of Contents
Advertisement
Parallel Hotport
Timeout
This is the value used by the printer to time out from the current port and
check the other ports for data to print. When the printer has not received data
from the host after a certain period of time, it needs to Timeout in order to
service the other ports. Values are from 1 through 60 seconds, with 10
seconds as the default.
Report Status
When this option is enabled, faults are reported even if the fault is not on the
current active port. If the option is disabled, the default, a fault on the printer is
reported only if it occurs on the active port.
109
Advertisement
Table of Contents
