Chapter
2
Install Basic Components
Figure 33. Forms Thickness Lever and Tractor Doors
4. Raise the forms thickness lever as far as it will go. See Figure 33.
5. Open the tractor doors. See Figure 33.
6. Remove the ribbon spools from the package.
Spool
Right Ribbon Hub
Figure 34. Placing the Ribbon Spool on the Right Ribbon Hub
7. With the ribbon supply to the outside, squeeze the right hub latch and
place the full spool on the right ribbon hub. Press the spool down until the
hub latch snaps into place. See Figure 34.
48
Tractor Door
Forms Thickness
Lever
Hub Latch