Table of Contents
Advertisement
Chapter
2
Power Paper Stacker Option
Rear Paper Exit
Paper Guide
Assembly
Figure 50. Checking the Paper Feed (Pedestal Models)
3. Pedestal models:
NOTE: See the Operator's Guide for instructions on switching between the
•
•
4. Cabinet models: Close the cabinet front and rear doors, if the length of
the form allows.
5. Cabinet and pedestal models: Continue with the next procedure to set the
top-of-form.
60
Paper Guide
Assembly
two paper exit modes.
When using the top exit paper path, paper can not be stacked. Paper
is intended to be removed after each print job is completed.
For rear paper exit: Press the Form Feed key several times to ensure
that the paper feeds properly beyond the tractors, over the paper
guide assembly, and through the paper exit slot in the rear of the
cabinet. Ensure that the paper folds the same way in the stacking
area as it does in the supply area. See Figure 50.
For top paper exit: Press the Form Feed key several times to ensure
that the paper feeds properly beyond the tractors, over the paper
guide assembly, and through the paper exit slot. See Figure 50.
Top Paper Exit
Advertisement
Table of Contents
