Print Custom Set Values; Name Custom Sets; Reset Custom Set Names - IBM 6400-D Generation II Series Setup Manual

Chapter 4
Configuration Management Menu

Print Custom Set Values

This option is used to print a listing of various stored printer custom sets. It is
recommended that you store the printout of the custom sets in a safe place for
quick referral.

Name Custom Sets

You may specify a 30-character name which can be used to refer to a custom
set. The name you enter for a custom set will be used in the Recall Custom
Set, Save Current Values, Delete Custom Set, Change Power On Set, Protect
Custom Sets, Print Custom Set Values, and Name Custom Sets menu. The
name can only be cleared by using the Reset Custom Set Names menu.
Press the MICRO UP or MICRO DOWN keys to cycle through the values
available for that character at the cursor location. Press the SCROLL UP key
to move to the next character to be modified. Press the SCROLL DOWN key
to go back to the character to be modified. Continue until you have entered
the name you want to give to this custom set, then press ENTER to save. The
name you entered will now represent this custom set on the printer's front
panel. To exit this menu without saving, press any key other than the ENTER
key. The custom set name will revert to the last saved value.

Reset Custom Set Names

You can reset specific custom set names back to the default value of the
configuration number.
104