Pride Mobility JAZZY 1121 Owner's Manual page 23

Power chair
Hide thumbs Also See for JAZZY 1121:
Table of Contents

Advertisement

V . C O M F O R T A D J U S T M E N T S
Euro Seat Armrest Height Adjustment
You can adjust the armrest height to one of four posi-
tions in either 1.27 cm (0.5 in.) or 2.5 cm (1 in.) incre-
ments.
To adjust the height in 1.27 cm (0.5 in.) increments:
1. Remove the height adjustment screw from the arm-
rest. See figure 18.
2. Raise or lower the upper armrest.
3. Align the adjustment holes in the lower armrest
with the bottom hole in the upper armrest.
4. Reinstall the screw to secure the armrest.
To adjust the height in 2.5 cm (1 in.) increments:
1. Remove the height adjustment screw from the arm-
rest. See figure 18.
2. Raise or lower the armrest.
3. Align the adjustment holes in the lower armrest
with the top hole in the upper armrest.
4. Reinstall the screw to secure the armrest.
Euro Seat Controller Position
You can position the controller for either left-hand or
right-hand use.
WARNING! Do not place the controller
harness so that it can be pinched in the
seat frame or the power base frame.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller from the power base.
3. Cut the wire tie that attaches the controller harness
to the armrest.
4. Loosen the button head screws on the figure 8 clamp
assembly located on the armrest. See figure 19.
5. Slide the controller out of the loosened clamp assembly.
6. Loosen the button head screws on the clamp assem-
bly on the other armrest.
7. Remove the manual recline lever assembly and
insert it into the clamp assembly on the opposite armrest. See figure 14.
8. Tighten the button head screws to secure the manual recline lever assembly in the figure 8 clamp.
9. Insert the controller into the remaining open clamp assembly.
10. Tighten the button head screws to secure the controller in the figure 8 clamp.
11. Use wire ties to secure the controller harness and the manual recline lever cable to the armrests.
12. Plug the controller into the power base.
Jazzy 1121
HEIGHT
ADJUSTMENT
SCREW
ADJUSTMENT HOLE
Figure 18. Armrest Height Adjustment
BUTTON
HEAD
SCREWS
Figure 19. Controller Position
www.pridemobility.com
UPPER ARMREST
LOWER ARMREST
CONTROLLER BRACKET
FIGURE 8 CLAMP ASSEMBLY
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents