Secondary-Side Circuit Board Replacement - Epson PC AX Technical Manual

REV .A DISASSKMBLY AND ASSKMBLY
5.3.2 Secondary-side Circuit Board Replacement
1. Replace the cable clamp (F) on the cable (G).
Hold the cut section of the cable clamp so that it will not come off.
2. Insert the thinner section of the cable clamp in the hole on the power
supply case.
3. Connect the connector (E) to the secondary-side circuit board
CD).
4. Fasten the secondary-side circuit board with the four screws (C).
5. Fasten the cover (B) with five screws (A).
5-13