Directv Coax Network Connections - KVH Industries RV1 User Manual

TracVision RV1 User's Guide
Switching Satellites

DIRECTV Coax Network Connections

66
DIRECTV recently adopted coax networking technology, by which
both satellite TV signals and network communications data are carried
by the coax cables. This simplifies installation, since Ethernet cables
don't need to be run to all of the receivers.
Non-Genie Configurations
If a Genie DVR (HR44 or HR34) is not present on your DIRECTV SWM
network, you need to install a DECA with power supply and DC to RF
adapter, collectively referred to as a DECA Broadband Kit (KVH part
no. 19-0860) and formerly called a Cinema Connection Kit. When
connected to the SWM splitter and the TV-Hub's Ethernet port, either
directly or via an onboard router, the DECA relays messages between
the DIRECTV coax network and the Ethernet network.
Figure 7-3 Non-Genie Configuration