TracVision RV1 User's Guide
Satellite Settings
Creating a New Satellite
50
If the satellite you wish to track is not included in the satellite library,
you can add a new custom "User" satellite. To create a new satellite,
follow these steps:
1. On the Satellites page of the web interface, click the (i)
information icon next to any of the "User" satellites.
2. Fill in all of the tracking parameters with the correct
information for your desired satellite. See
Tracking Parameters" on page
NOTE: You can only create a satellite that is compatible with the LNB that is
currently installed in the antenna.
3. Choose a friendly name for your new satellite, so that you can
easily identify it later. Then save your changes.
4. To install your new satellite in the antenna for tracking, follow
the steps in
"Selecting a Single Satellite" on page
Figure 6-2 User Satellites (Circular)
"Changing Satellite
56.
49.