7. Now position the right hand
sprocket feed in the same
way to suit the width of pa-
per. Make sure that the pa-
per is slightly tensioned.
8. Switch the printer on. The
print head will move to the
left end of the platen and the
active indicators on the op-
erator panel will light.
9. Fit the new acoustic cover.
You can set the values for paper
handling as you wish by means
of the printer menu in the Bot-
tom Feed group.
Remove the tractor feed from the switched-off printer by repeating
the installation steps in the reverse order. The paper feed rail must
also be removed. Now refit the paper separator and paper support
as described in Chapter 1.
Chapter 7: Accessories
Removing the
tractor feed
7-17