Oki Microline 3390 User Manual page 127

Superscript characters are printed above the base line and are used
2
for exponents (x ) and other typographical effects. Subscript is par-
ticularly suitable for chemical formulae (H
script characters are represented in all pitches in half character
height and normal character width.
Function
Start italics
Stop italics
Italic characters are printed sloping slightly to the right and particu-
larly highlight individual words, sentences or whole paragraphs.
You can also activate this function via the menu to print a complete
document in italics.
Multifunction commands
Different print functions can be combined in a single escape se-
quence with multifunction commands.
Function
Select print quality,
pitch and font
The parameter n defines here the combination of print quality,
pitch and font in accordance with the following table. Insert a value
from the following table for n.
The following print qualities and pitches can also be selected via
the control panel or the menu.
n Print mode
0 Data Processing Quality
2 Letter Quality
3 Letter Quality
4 Data Processing Quality
6 Letter Quality
7 Letter Quality
O). Superscript and sub-
2
Dec. Hex.
27 37 71 1B 25 47
25 37 72 1B 25 48
Dec. Hex.
27 33 n 1B 49 n
Pitch
10 cpi
10 cpi
proportional
10 cpi
10 cpi
proportional
Chapter 10: IBM - Standard Functions
Italics
ASCII
ESC % G
ESC % H
Print quality,
ASCII
character pitch and
ESC I n
typeface
Font
resident
resident
resident
resident
resident
resident
10-7