Oki Microline 3390 User Manual page 225

Assignment
0
1
2
3
The national character set selected in the Language Set menu posi-
tion is valid for all assignments 0 to 3. The code page selected by
means of ESC t Pn after the assignment therefore possesses the na-
tional version selected.
The copy command for the downloadable character set uses the
current code page assignment.
The assignment 2 is used as standard for selection of the downloa-
dable character set. If it has been overwritten with another assign-
ment through this command, the downloadable character set can
no longer be selected. The printer must be reset so that the standard
assignment is valid again.
The selection of the national character set is not changed by chan-
ging the code page assignment.
If the current code page is selected by means of the command ESC R
Pn, this code page is assigned to the parameter Pn
page must therefore be selected with the command ESC t Pn = 1.
The code page selected with this command sequence contains no
national variations however!
If a national variation is selected with the command ESC R Pn (Pn =
0-20, 64), the code page 437 (USA) with the previously selected na-
tional variation is assigned to the parameter Pn
The assignment of the code page is reset to the initial setting under
the following conditions:
• The printer is reset by hardware, software or the control panel.
• The printer menu is activated.
Pn Code page
1
00H, 30H italic character set
01H, 31H code page selected in the
Code Page menu item
02H, 32H downloadable character set
03H, 33H graphic character set
Chapter 14: Epson - Standard Functions
= 1. This code
1
= 1.
1
14-43