Character Sets And Code Pages - Oki Microline 3390 User Manual

This command is deleted when selecting a character pitch by means
of the commands ESC P, ESC M, ESC g, ESC p Pn and ESC ! Pn. If
the printer is reset, this command is deleted and the step sizes for
the initial setting become valid again.

Character sets and code pages

Function
Print several characters
from the fully printable
character set
With this command, all characters from the range decimal 1 to 255
of a code page are addressed as printable characters. The address 0
is treated as ASCII NUL code.
The parameters Ln and Hn specify the number of characters to be
printed:
Hn = integer (number of characters / 256)
Ln = number of characters - (Hn * 256)
If the parameters Ln and Hn = 0 are set, this command is ignored.
This command is effective for all selectable code pages.
Function
Assign new code page
With this command, four different characters sets can be assigned
to the command ESC t Pn.
Hn = integer (number of characters / 256)
Ln = number of characters - (Hn * 256)
Dec. Hex.
27 40 94 1B 28 5E
Ln Hn Ln Hn
Data Data
Ln = 0 to 255
Hn = 0 to 255 (MSB ignored)
Dec. Hex.
27 40 116 1B 28 74
Ln Hn Ln Hn
Pn Pn Pn Pn Pn Pn
1 2 3 1 2
Ln = 0 to 255
Hn = 0 to 255 (MSB ignored)
Pn = 0 to 255 (MSB ignored)
1
Pn = 0 to 255 (MSB ignored)
2
Pn = 0 to 255 (MSB ignored)
3
Chapter 14: Epson - Standard Functions
Print characters
ASCII
from the fully printa-
ESC ( ^
ble character set
Ln Hn
Data
Assign new code
ASCII
page
ESC (t
Ln Hn
Pn Pn Pn
3 1 2 3
14-41