Oki Microline 3390 User Manual page 329

When using a cut sheet feeder (CSF), the cut sheet formats are differ-
ent:
The paper width (a) is between 182 and 216 mm (small printer)
and between 182 and 364 mm (large printer).
The paper length (b) is between 182 and 356 mm (small printer)
and between 182 and 364 mm (large printer).
You can use paper weights between 45 and 90 g/m
sheets via the cut sheet feeder (CSF), the paper weight must not be
less than 60 g/m 2 and must not exceed 90 g/m
Labels (on single sheets)
g
e
b c
f
The paper width (a) is between 88.9 and 216 mm (small printer)
and between 88.9 and 363 mm (large printer).
The paper length (b) is between 76 and 420 mm.
The non-printable left margin is between 6.35 and 28.6 mm. For
paper with a width of 304.8 mm the size must be between 19.05
and 28.6 mm.
Appendix E: Paper formats and print areas
2
. When using cut
2 .
d
print area
a
Weight
a = 88,9 to 216 mm /
h
88,9 to 363 mm
b = 76 to 420 mm
c = printable length
d = printable width
e = min. 6,35 mm
f = min. 4,35 mm
g = 6,35 to 28,6 mm
h = min. 6,35 mm
Format
E-5