Oki Microline 3390 User Manual page 330

Appendix E: Paper formats and print areas
Weight
Further information
a = min. 6,35 mm
b = min. 2,54 mm
c = min. 2 mm
d = min. 6,35 mm
e = 12,7 mm
f = min. 6,35 mm
r = label corners must
be rounded off
E-6
The support paper for labels can be processed with a weight of 33 to
2
41 g/m . The overall thickness of 0.28 mm however must not be ex-
ceeded.
The condition of the support paper must ensure that the label is not
removed when the paper is turned about 180° around a cylinder
with a diameter of 27 mm. The labels must not detach during the
process of printing or paper feeding. The support paper must be as
bendable as possible. No labels should be removed from the support
paper. A label must not have wrinkles or waves in the feed direc-
tion.
Labels (on continuous paper)
Labels on continuous paper must only be fed from the bottom side
of the printer (with additional transportation unit for continuous
paper).
b
a
print area
e
f
b
print area
r
d
c
c