Table of Contents
Advertisement
Digit Map
DTMF Mode
Enable Call Forwarding
Unconditionally
Enable Call Forwarding On
Busy
Enable Call Forwarding On
No Answer
Enable Call Waiting
Enable Conferencing
Enable Do Not Disturb
Subscribe for MWI
Enable Call Transfer
When you are finished entering the required information, click the
To configure the second voice port, return to the VoIP SIP Lines screen.
When you are finished, you will be prompted to restart your router.
SIP Line Entry
A set of rules used to recognize a number dialed by the user and to
ensure this number matches the dial plan defined by the ITSP.
Call Features Settings
Choose the Dual Tone Multi-Frequency Mode:
• Inband: Sends the DTMF digits as a normal inband tone.
• RFC2833: Sends the DTMF digits as an event as part of the RTP
packet header information.
• Info: Sends the DTMF digits in the SIP INFO message.
If you check this checkbox, all calls will be forwarded to a specified
number.
The Unconditional Call Forwarding Number field will appear for you
to enter the number, if enabled.
If you check this checkbox, calls will be forwarded to a specified num-
ber if the line is busy.
The On Busy Call Forwarding Number field will appear for you to
enter the number, if enabled.
If you check this checkbox, calls will be forwarded to a specified num-
ber if there is no answer.
The On No Answer Call Forwarding Number field will appear for
you to enter the number, if enabled.
If you check this checkbox, call waiting is enabled.
If you check this checkbox, 3-party teleconferencing is enabled.
If you check this checkbox, the Gateway will reject VoIP calls without
ringing the phone.
If you check this checkbox, Message Waiting Indicator is enabled
when new voice mail is received.
If you check this checkbox, Call Transferring is enabled when an
incoming call is received.
Submit
button.
87
Advertisement
Table of Contents
