Configure Your Pc For Dynamic Addressing; Motorola Netopia ® Gateway Quickstart - Motorola Netopia 7000 Administrator's Handbook

Administrator's Handbook
Configure Your PC for Dynamic Addressing
The following instructions assume that you want to use the automatic configuration and address shar-
ing features of the Gateway to provide IP information to devices on your Local Area Network. To connect
additional computers that will use the Gateway's address sharing feature repeat these steps for each
computer.
Microsoft Windows:
Navigate to the TCP/IP Properties Control Panel.
1.
a. Some Win-
dows versions
follow a path
like this:
b. Some Win-
dows versions
follow a path
like this:
Then go to Step 2.
Select Obtain an IP address automatically .
2.
Select Obtain DNS server address automatically , if available.
3.
Remove any previously configured gateways, if available.
4.
OK the settings. Restart if prompted.
5.
Proceed to the next section
12
Start menu -> Settings ->
Panel -> Network (or Network and
Dial-up Connections Local Area
->
Connection -> Properties
[your_network_card] or
tocol [TCP/IP] Properties
->
Start menu -> Control Panel
Network and Internet Connec-
tions -> Network Connections
Local Area Connection ->
ties Internet Protocol [TCP/IP]
->
-> Properties
"Motorola Netopia® Gateway Quickstart" on page
Control
) -> TCP/IP
Internet Pro-
->
->
Proper-
15.