Motorola Netopia 7000 Administrator's Handbook page 196

Administrator's Handbook
set security ipsec tunnels name "123" dest-int-netmask netmask
Specifies the subnet mask of the destination computer or internal network. The subnet mask specifies
which bits of the 32-bit IP address represents network information. The default subnet mask for most
networks is 255.255.255.0 (class C subnet mask).
set security ipsec tunnels name "123" encrypt-protocol { ESP | none }
See page 201 for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" auth-protocol {AH | ESP | none}
See page 201 for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" IKE-mode pre-shared-key-type
[ ascii | hex ]
See page 201 for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" IKE-mode pre-shared-key hex_string
See page 201 for details about SafeHarbour IPsec tunnel capability.
Example: 0x1234
set security ipsec tunnels name "123" IKE-mode
neg-method { main | aggressive }
See page 201 for details about SafeHarbour IPsec tunnel capability.
Note: Aggressive Mode is a little faster, but it does not provide identity protection for negotiations
nodes.
set security ipsec tunnels name "123" IKE-mode DH-group { 1 | 2 | 5 }
See page 201 for details about SafeHarbour IPsec tunnel capability.
196