Motorola Netopia 7000 Administrator's Handbook page 207

set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dest-ip ip_addr
Specifies the destination IP address to match packets (where the packet is going).
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dest-mask mask
Specifies the destination IP mask to match packets (where the packet is going).
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
tos value
Specifies the TOS (Type Of Service) value to match packets. The value for tos can be from 0 – 255.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
tos-mask value
Specifies the TOS (Type Of Service) mask to match packets. The value for tos-mask can be from 0 –
255.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
protocol value
Specifies the protocol value to match packets, the type of higher-layer Internet protocol the packet is
carrying, such as TCP or UDP. The value for protocol can be from 0 – 255.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
src-compare [ nc | ne | lt | le | eq | gt | ge ]
Sets the source compare operator action for the specified filter rule. src-compare only displays when
the protocol is TCP or UDP.
Operator Action
nc No compare
ne
Not equal to
lt
Less than
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than
207