Table of Contents
Advertisement
DCS-VIP Internet Keyphone
Now the system is configured to allow you to dial any extension on the six systems in our net-
work. The dialling format is:
where XXX is the system code (e.g. 100 for the Oxford Gateway system), and YYY is the desti-
nation extension number.
The DDI table allows incoming calls to access all extensions, all station groups and trunk group
9.
Allow Break In and Break Out
This is done using MMC programming from a keyphone. (Refer to the Samsung DCS-VIP Inter-
net Keyphone Programming Manual for details.)
MMC 821 (Set VoIP Option)
Options:
If both of these options are set to YES ("ON"), this will allow calls to break in and out of the VIP
router to the VoIP connection.
MMC 210 (Customer On/Off Per Tenant)
Option:
If set ON, this enables password protection for break in.
The final procedure is to direct incoming calls to one of the VoIP trunks. Depending on what
type of trunks you are using (MSN or DDI) you will need to set up the appropriate table (DID
Digit or MSN Digit) as shown below.
80 XXX YYY
VoIP à BRI TANDEM (YES/NO)
BRI à VoIP TANDEM (YES/NO)
TEN. ON AND OFF à VIP TAND PWD OFF/ON
— 35 —
Quick Guide
Advertisement
Table of Contents
