Table of Contents
Advertisement
DCS-VIP Internet Keyphone
i)
From the keyphone, open system programming and select MMC 818.
ii)
Select YES to COPY K/P DB and confirm your selection.
iii) If you have configured an optional VoIP card, select COPY VOIP DB, then select YES and con-
firm your selection.
The configurations are now saved to flash memory.
3. Save Configuration Information to the PC's Hard Disk
The procedure for saving configuration info rmation to the hard disk should be carried out only
after you have successfully saved the data to flash memory as described above. Information for
each item (router, keyphone and optional VoIP card) is saved in a separate file on disk which
you can later use to restore your system if necessary.
i) Click the SYSTEM MANAGEMENT—> SAVE CONFIG menu. The following screen a ppears.
It is not important which item (Router, Keyphone or VOIP) you select to save first.
ii)
Click on an option button to select the item to save and click the Set button. A 'File
Download' dialogue box appears.
iii) Select the option to save the file to disk and click the OK button. Another dialogue box
appears.
iv) Enter a name for the file (or accept the name suggested) and click the Save button. You
are told when the o peration is co mplete.
v) Close the dialogue box.
vi) Repeat steps (ii) – (v) for each additional item to save.
— 21 —
Quick Guide
Advertisement
Table of Contents
