Table of Contents
Advertisement
DCS-VIP Internet Keyphone
Set the following parameters.
Tel No.: Select the trunk number which will be used in MSN mode.
l
MSN Digit: Enter an MSN (up to 12 digits) using the numbers 0–9.
l
Destination: Set the station number that will be connected to each MSN
l
number.
Click the Next button.
Keyphone Configuration Confirmation
Keyphone Configuration Confirmation
The keyphone function configuration now appears on the Configuration Confirm screen. Check
the data carefully.
To make any corrections, click on the Prev button to go back to the previous stage, or click one
of the Page1, 2 or 3 buttons to return to that page. If no corre ctions are needed, click on the
Set button.
Configuring the Router Functions
Click the WIZARD SETUP
configure the LAN and WAN environment necessary for connecting to either the Internet (ISP)
or a remote node using the DCS-VIP.
Router Wizard Setup - - Setup 1
Router Wizard Setup
On this screen you can set up the ISP or remote node connection, and the DHCP and ML-PPP
functions.
— >
ROUTER SETUP option. In the Router Wizard Setup, you can
Setup 1
— 13 —
Quick Guide
Advertisement
Table of Contents
